First Pix : My '70 with a 911 turbo style wing matted to a stock decklid
 

Of course, as you can tell from the body work, the decklid isn't stock anymore, but it started life off as a stock decklid, with no gap for a license plate. ok, i'll just post the pix....

http://www.cityofschmidty.com/sp1.jpg
http://www.cityofschmidty.com/sp2.jpg
http://www.cityofschmidty.com/sp3.jpg
http://www.cityofschmidty.com/sp4.jpg

http://www.cityofschmidty.com/sp5.jpg


The rear decklid/unit is hinged on the bottem, using a piece of square tubing going from one side to the other.
http://www.cityofschmidty.com/sp6.jpg
http://www.cityofschmidty.com/sp7.jpg
http://www.cityofschmidty.com/sp8.jpg

http://www.cityofschmidty.com/sp9.jpg
http://www.cityofschmidty.com/sp10.jpg
http://www.cityofschmidty.com/sp11.jpg

Very cool! Custom work is always a big :agree:

Heyyyy me likey!!!!! :agree: :agree: :agree:

nice work. that should leave you some room in there.

that's really cool!
I hope you have a really good latch or pins on it! :D

yes, that was a big concern of mine, but when its closed, you could literally throw your body into the decklid, and it aint goin no wheres..... :D

Now, where did I put that engine??
ah yes.....
-pix coming soon