clutch advice needed
 

So my clutch is slipping (so far mostly in 3rd gear).
Motor is a (app 150 hp) Subaru 2.5L.

Should I get a new (hp-type) disk, a heavy duty pressure plate, or the whole kit-n-kaboodle ?

Tips ? Advice ?

Thanks,

Rob.

Rob,

I'd suggest either a stage one Kennedy and a Daiken disk, or a stage 2 and a stock disc.

That's assuming your suby uses a type 1 flywheel? I'm not current on subies!


Alex

I have kennedy 2500 p/plate with 4 puck on my turbo suby and work fine,

Rob,

The stage 2 with stock disc holds 270 ft/lbs according to the KEP website. I'm running a stage 2 with 6 puck disc .... good for 340 ft/lbs.

I think you're running the stock 4 speed right ?

Sandeep

Yup, still running the stock 4spd.

I'll probably will stick with that for a while...until it breaks.

Rob.