IRS Drivetrain bullet proofing...
 

944 Stub axles, allows fitment of 100mm joints. No mods required, just replaces the stock beetle 90mm stub. OEM Porsche $C125pr

944 Axles, OEM Porsche, with circlips and washers. No boots or joints. $C75pr (approx 16" long O/A)

Stock T1 axles, but one side was machined to fit 100mm joint (fits 90mm joint on other side) $C45pr no joints or boots, but all circlips and washers included.

Stock T1 axles, but both sides were machined to fit 100mm joints, $C50pr, no joints or boots, but all circlips and washers included.


Bus joints (100mm), $C75 set of 4. No boots. With bolts and spreader washers.

I may have some 944 CV's, but probably not a full set. I can dig deeper if anyone is interested.

Easy,
Lanner