No, as stated in the original post of this thread this retrofit is not a simple bolt on nor is it easy. The Super upper strut bearing mount is not the same as the 944/951, the Porsche has 4 bolts and the Super has 3 bolts.

The 944/951 strut has a larger diameter spring than our Supers so they will not work. This has been covered in other posts, do a search. Yetibone has used a 944 strut with a Super spring but had to make some kind of clamp to hold the spring to the strut housing, which (in my opinion) is not safe.

There are 3 ways to mount 944 Turbo (951) brakes to a Super, all are listed above in the original post.

Start a new post about adapting the electric speedo because I have no info for you. I'll use the OEM Super speedo, so I have done no research on this subject nor have any interest to do so.