I've got the BAS header 21152 and a custom muffler (1 muffler instead of 2 like the BAS) setup. I'm using a Dynomax Super Turbo 2 1/2" muffler. Its their corvette replacement muffler with the inlet and outlet on the same side. Makes for a clean, stealth install.
I installed the muffler so I had clearance for my 18x10's (ET 47). I'm using a 930 rear brake setup and this increases the track by 30mm each side so the end result is the inside of the wheel/tire combo has about 10mm clearance from the spring plate on the IRS rearend, and about 20mm of clearance from the inside of the tire to the muffler.
So with your setup, you will be fine.
I'll take some pics and post tonight.
Sandeep
|