|
18x8.5 et 52mm with 235/35 front (FVD Cup2 replicas)
18x10 et 47mm with 265/35 rear (FVD Cup2 replicas)
No wheel spacers but I have a porsche 930 rear brake system consisting of 944 N/A hubs and backing plate + 944T front caliper + 930 rotor (increases rear width per side by 30mm) and a custom porsche 993 Biturbo front brake system (increases front width by 12mm per side)
The front fenders will be 2" wider and the rears will be 2 1/4" wider. I haven't purchased these yet as I can't find fenders in these widths. I may have to get my original metal fenders widened. Reason I want these widths is so the wheels 'JUST' tuck underneith.
I have a IRS rear end and ball joint front on a standard beetle. Front lowered 4" via adjustable beam/dropped spindles and rear is dropped 2". The rear bump stop is clearanced as is one springplate bolt. The original bolt was replaced with a button head bolt to gain clearance.
Sandeep
|