Here's some pics of the oil cooler location and the ducting for it. Its a 96 plate mesa cooler with 180 deg oil thermostat and 180 deg fan switch and Spal fan with 30 amp relay.
There is a square cut out under the cooler that vents the hot air outside the body. the opening is covered with a tight mesh that keep debris out.
Here is the ducting ... 4" aluminum duct with some furnace attachments that you can find at the local hardware store. I thought it added a 'race look' to the rear seat area... nice and neat.
I just have to get the cooler box made out of Carbon now.
Cont in next post ...