|
TTT.
i know there has to be some other opinions out there considering the mass discussion on brake bias, etc. i am hoping you guys keep me pointed in the right direction from doing something stupid. i think it is alright, but other thoughts are always welcome.
it seems to me that since i can not get 944 all the way around right now and going back to the stock m/c is not really an option (already have the 944 hooked up, that sticking with the ghia disks and rear drums is the closest to front and rear biasing vs. 951 fronts and rear drums. most can make the switch from front drums to ghia disks with no change in proportioning or m/c. so i am assuming about the same amount of fluid is pushed and that even with a bigger 944 m/c, i am pushing about the same front to rear. with the 951 fronts it seems that the rears would lockup very easy compared to clamping those fronts down. but i am an amateur at brakes.
this setup up is only to get me to a show in FL and back and will be coming off in the winter to make the conversion. so no long term plans with this setup. but i want to be safe while running it. if there is no safe way to do it, i will tow it down with this setup and do the conversion as planned.
help keep me straight and safe here.
|