|
OK found no blockages. In the webers
primary jets are- 125
idlejets are- 55
pump jet is -40
float level is-10/32.5
These are Idf 40 spec,s when I compared mine to the weber chart
I was suposed to get Idf 44s Thats what I ordered as I recall
Is there a way to check the carb size? between 40s and 44s
I will take some venturi measurements
I have found out that 40s would probley be a better size fit and be more driveable. But which jets would be correct
It,s time for Jake to chime in If would The UPS truck just pulled up ,the jet pacs have arrived
Please understand That Jake DID NOT build this engine.
I do not hold him responcible. in any way It was built up to a long block by John Helgerson and the rest is my effort. the parts I think are to Jakes spec.s by Mr Helgerson.
It is suposed to be the same as the M-4 2056 C
__________________
T-4. 2.0 w/t 36 hp upright DTM Going In a 356 Drauz , automatic , 1970 VW Kitkar pictures at Http//home.earthlink.net/~oldyelerbh2
Last edited by oldyeler; November 18th 2003 at 14:00.
|