vujade: OH YEAH! Try about 10 or so (just a guestiment)
Sorry botu the RX-7 Brendan, rotary is completely different....
zen: Ok, you kinda know what I'm planning on doing, as I have explained in my e-mail. Well it's hard for me to explain by typing and not being able to lay it down on paper, and the channel is what I was planning on doing....but here it goes!
If you read my thread in the fiber forums you are probably familiar with the bumpers I am looking to use. Each bumper/spoiler has three main openings (one big opening in the middle and two smaller openings off to the sides) allowing me to use ducts to my advantage. As I stated before, I will be using an oil-cooler in the front center opening of the bumper. To avoid this opening from causing any trouble in aerodynamics, I chose to duct the air through the front, past the steering componants (depending on how the bumper sits on the car) and the trunk space, exiting through the hood...Now on the hood opening I was thinking in terms of a canard style wing, small yet will create downforce.
Thats about as much as I can elaborate right now, I do not have a front bumper to work with YET! I will be getting one in the near future as soon as I chose the right one. I promise to update everything that I have been lacking in a.s.a.p.!
I hope that clears it up for everyone a LITTLE bit, sorry I give you more... next time
John