Building my own Kafer Cup brace.
Hokay, I've sourced all the materials online to fab the bars out of hard aluminum pipe, and pieces to connect to the uprights out of 11mm ID aluminum pipe, and aluminum plate. I guess the ball-ends will be 1/2" stainless with a 3/8" hole. I'll make the chassis attach points myself.
I don't know the pipe measurements yet, or the actual size of the ball-end threads.
Yetibone
__________________
Yetibone
'71 1302S 1.8
'73 1303S 2.3
'83 928S 4.7
|