[danielzink]

To those of you that have put 944T Brembos on a swingaxle.
I've been told it's pretty much a "bolt-on".
I've got my backing plates and calipers - the hubs are on the way.
I need a backing plate install kit right ? (big seal that goes in the backing plate and some assorted gaskets where the backing plate bolts to the axle flange).
Then just start unbolting the old stuff and bolting on the new ?
Do use the stock "spacer" that's on the axle ? (big metal one that slides over the splines).
I've heard I may have to mill 15 or so mm off the hubs if I have short axles.

What am I missing ?
what about parking brake cables ?

Thanks, Dan