|
Alright,
$C750 for the wheels as described and the front rotors. Also, complimentary machining of your rear rotors/drums to the 4-100mm bolt pattern.
More info on the disks:
They are stock disks machined and studded(M12x1.5) for 4-100mm bolt pattern. They measure at 0.370" thick (New=0.374, Wear limit=0.315), so they are in very good condition. They are crossdrilled.
Any takers?
Lanner
Last edited by flat; December 29th 2004 at 14:55.
|