|
Greetings,
Lanner responded to my email on the rear sway bar bushings. Here is an excerpt from the email...
"The 944 sway bar bushings are exactly like super beetle front sway bar bushings. So you can use the super beetle bushings for the stock arm. I think the stock SB sway bar is 18.5 or 19mm. A little trick I use is to wrap the bar with Teflon tape at the bushing. You can fit the bar exactly to the bushing and completely eliminate any chance of squeaking."
Apparently, the front SB bushings and rear 944 bushings are the same. I'm not in the position to test this outyet, but maybe one of you guys out there may be at this stage and can let us all know if it works.
Cheers,
Doug
|