|
It is very hard to say unless you find someone with the exact same setup (as I had trouble working out offset required when planning my wheel choice).
I started with stock width b/j beam (68 pan, 63 body) and 17x7.5in cup 3 replicas. The tucked inside stock fenders nicely but turning circle was shocking. I think you may struggle fitting 45 offset wheels under stock fenders unless you narrow the beam.
I have since had to narrow a beam 80mm (3 and a bit inches), and now have to work out how wide the spacers will need to be to regain turning circle but still fit inside fender edge. I used CB dropped spindles and CB front disc kit.
Cheers
Alan
|