Quote:
|
Originally Posted by Lazarus
which is more important to keep an eye on oil temp or head temp? i only have enough room for one gauge so i have to decide.
|
why not use one gauge and two senders, work out what the max and min temps will be for both the head temp and the oil temp and get a gauge that covers the total range fit two sensors one for the head temp and one for oil temp run both the wires up to a two way switch and connect the signal wire from the gauge to the switch...the best of both worlds flick the switch left and have head temp, right and have oil temp and it will only cost you the extra sensor and the switch.
you could even run 3 sensors and a 3way switch that way you could have both left and right head temps and a oil temp as well.
simple