Quote:
|
Originally Posted by kafer.chris
like the thinking there ...
Does mbt seee if individual like???
|
Not sure what you mean there!
I think the 86 turbo rear disc is the same as the 928, no idea if that is the same again as the 964 but it wouldn't surprise me.
www.eurocarparts.com web site is not bad for that sort of info as it lists fitment by the part numbers.
I don't know off the top of my head if the caliper bolt spacing is the same for the calipers, I guess you can measure yours!
For the front hub I measured a friends aftermarket discs and the thread depth was about 15.5mm. If I reduce this down to 10mm by taking material off the front face, which should be more than sufficient for strength, and use press in studs from the back, the additional thickness of the slip over 996 disc should bring everything back to the stock track width.
I suppose I will probably end up buying the parts from my local GSF, I should be able to return them if they don't fit...
Rich