[VEEMAN]

I have a chance to purchase a pair of Ali A arns off an 1986 944. My question is, is it possible to use the drive shafts off an 924? I have the 901 dog leg box fitted to the 03 at the moment. the inboard CVJ is off a T4 transporter fitted with standard 03 CVJ on the A frame end. These joints are fitted onto the 924 splined shaft.
So is the above combination I've fitted already suitable to do the straight swap to the Ali Porsche 944 A arms.
Any one done this conversion with the drive shafts I've got fitted at the moment can clarify it will work or won't. I don't want to swap the driveshafts off the 924 if I can use them.
Any help would be appreciated.
Cheers
VEEMAN