|
Welcome
You should have no trouble with your set up. I'm not sure how much it will increase the track. I'm also using the CB drop spindles and ventilated Kerscher front disc (with a Porsche 944T rear caliper) with no problems. I'm running 17 x 7.5 Cup II's with 205 x 40 rubber on them. I believe the offset on the front rims was 52mm. The only mods I.m making are to shave the outer edge of the shock tower, and pinch in the inner edge of the stock wings. There are lots of combinations that will work under the stock wings, check out some of the members rides. Good luck.
__________________
57 mutant
57 Oval GL
|