Here you are!
If you get 1303 74+ control arms,struts and sway bar you ca install the entire 944 front spindles !You need to make 2 shims for the lower ball joints or to order a pair from Kerscher.
944 NA rear trailing arms are a direct bolt on EXCEPT the cv's outer diameter as the VWs are 90mm and the 944 are 100mm.
Solution : vw 181 "thing" transmission output flanges (100mm) and 944 rear axles or remove the caliper bracket,hub etc from the 944 trailing arm and install it at your trailing arms they fit ! No cv problems anymore !
951 (944 turbo) first year is 1986 last is 1992 968 are using the same brakes...Front rotors are 298x28 and rears 299x24 951&968 "S" are using 304x32 front rotors and lager calipers (928 S4) all later aluminium trailing arms require a lot of more parts to be installed.Longer cvs,different spring plates etc...
Rgds,
__________________
Jim Andritsakos
74 1303 GL (project)
75 181 ex bundeswehr / 85 T3 Panel
86 T3 Syncro ambulance / 87 T3 Syncro doubledoor 16
89 T3 Syncro panel
|