Cheers Sam - I'm lovin the progress on your car too!
Well finally the painted amp rack/cover tier is bolted in place - four M8 S/S button head bolts holds the upper tier frame in place....and the lower rack is screwed onto the MDF support blocks. The rack was designed so that I could access the fuses easily and amp controls...also with four screws the lower amp rack comes out easily to access wiring underneath.
I would have liked to incorporate some vinyl into the upper tier but didn't have any to match the interior, nor the time to modify it further. Ran out of time tonight to get the system running (just have to crimp the last 4 gauge power/ground connections....then hopefully it will fire to life to blow off the cobwebs!
Depending on the light/flash, the colour takes quite a different appearance.
