|
The spring packs from a 181 thing work and are stiffer than stock. I would think you would only need one at the most. I would put it in the bottom tube as it seems to take the most abuse. You don't have to use the whole pack either. You could use just the 4 large inners or the six small outer springs. They should be changed in pairs on the opposite sides of the grub screw or you may get less up than down or vice versa. I would also mark the two spring sets also such as with a red stripe for one set and a green stripe for the other. This will help to keep you from getting confused as you go for the ride and handling you want.
Kdanie I had a simular problem to the oneyou have and I went to a lighter shock and it helped alot. In my case the torsion bars couldn't overcome the shocks fast enough and the wheels didn't follow the ground. They seemed to stay in the air. The tires would chirp when I hit the brakes on a bumpy road.
Hope some of this helps.
|