scottwebster,
Hi there guess your using a super right? then if it is then if you can purchase a Maxx strut then it will be a good start, then I guess with that off-set of the rims you'll need atlist 1 inch spacer to clear the coil springs and to have the same spacer at the rears to clear the spring plates.
I'm using a 17x7.5 with a +42 offset and a 16x7 with a +40 offset, and my suspension is a custom made stock strut with a Honda civic rear springs at front, stock disc brakes with a 1 inch adaptor that has a 4x114.3 studs, at the rear its all stock.
My ride, 1302-S with stock fenders all around.
16x7
17x7.5
