[maniac]

ok, i use a online translator:

The carbon is over laminates.
I removed first whole plastics on the top side of the dashboard, to catch up my own dashboard. Afterwards take place the rough cut the carbons fiber from one piece.
The instrument panel is rough properly and degreased afterwards with silicone remover.
Subsequently, I coated the instrument panel thickly with epoxy resin.
Carbon fiber Mate now evenly without folds present.
Next Coat wet in wet.
be aware that there are no bubble or folds in the carbon fiber.
Now we will waiting that the epoxy will be dry (2 Days at 20°C)
You must now use 200 Sandpaper to rough the epoxy and remove the dust with silicon remover.
Next step: a new coat with epoxy.
Wait another day to get the exopy dry.
Now you can use 200, 400, 600 Sandpaper and polish the epoxy.
At last you can use Clear lacquer to get a fine coat.

Hope you can understand what i mean....