After a few shows, along with the weather cooling off. I have a fire again.
I started with the rear fenders. I used our plasma cutter to cut the Passenger side inner fender out yesterday. I also started widening the fender some. I moved it a little less than 1/2" yesterday. I'm back after it again today. I'm at the shop right now. I stopped working because of the storm, Tim wanted our freshly built '75 super inside. There might be hail in the storm. My car is outside.
After the rain stops I'll push it in and take a few pictures.
I already have enough room for the wheel to tuck! Just to re-itterate my set up.
I have Cup 2's 7"s 55et along with 944 rear hubs about +1" from drums. The wheels TUCK! I just have to make some room for clearance, and make a nice shape out of the fender. I could probably get away with another 1/2" but my goal is about 1" away. Either way, I'm pleased so far.
Before anyone sees the pictures, I've never done this before, and I had no idea where to start or what kind of shape I want in the end. I'm just trying my best to get the width I want, while I try to keep some kind of shape to it.