|
I had it done by a shop and watched the whole process. They used 3m tint IIRC, a heat gun, a piece of rubber as a squegee, an xacto blade, and a LOT of patience. It took a while, because the glass was on the car, but they managed to do it
__________________
________________________
1990 Mex-Spec GL Bug "The Blue Flame":
Engine: Planning Stage
Transmission: Planning Stage
Suspension: Front: 3/4 swaybar w/UrethaneBushings, Dropped Spindles. Rear:CB Camber Compensator. Lowered 2 splines
Brakes: Front Brakes: 280mm solid rotors, two pot calipers. Rear: 280mm solid rotors, 1 pot calipers w/ebrake
|