Important update
I just found out that the axles i have are not standard 944 ones .They are from a 944 auto model .What i had measured was the short side (380mm)as when i looked at the other it was over 400mm.I have just found another driveshaft to match the other short one and the splines are the same as the bug although i had to use a c clip as a shoulder and the original spacer.Short auto axle is 35mm shorter than original.I narrowed my arms 29mm so this should be ok.
__________________
The wisest mind has something yet to learn
Last edited by Sunroof53; August 9th 2007 at 21:49.
|