|
I have the 7 cm (inside widend and outside widend -> extension) wider version rear and 4 cm outside widend front ones. This required front and rear 1 inch original porsche spacers front and rear, which in turn required longer original porsche wheel bolts (expensive!), which come from a 944 rear (needed two sets obviously).
Nice thing about the wheel spacers up front is that the tire's don't hit the original 1303 spring anymore (Idon't have adjustable aftermarket ones) and I have the original wheel turning circle (which is very small = good on a 1303 with rack&pinion steering).
Tip: the rear springs from an old (1978 or so) passat (european name) are just right (same diameter) for the front 1302/03 . They lower the front by appr. 4 cm's and are noticebly stiffer!
Lately I have installed (a new development of Gerd Weiser) a steering damper, since 1303's with rack&pinion don't have this. It is great!
Pics: well, I dont have a digital camera, but will have my next film put on CD. Will look for an old .jpeg pic at home later.
Walter
|