|
Hey, I'll take a stab at it....
Most of the Kafer bars I've seen will foul the heater boxes.
My "underdog bar" was like that, because it mounts using the holes at the end of the horns.
Was able to run just one of the on the 1-2 side, however.
Any motor with heater boxes isn't enough of a motor to need a lot of bar, right?
SOme of the other bars, where you weld the tabs on would benefit from having the tabs welded on far enough forward to clear the 3-4 side.
Your idea of mounting the bar to the more stout end of the shock tower is genius! if it will all clear.
S'pose if you are fabbing your own bar, it would be easy to accomplish...
Please keep us posted, or put some pics up of your setup!
|