[QUOTE=piledriver;67321]Still have the overall dimensions for that fabricated arm?
I'm chafing to get on this.
The high angle ball joints I have seem have a very short service life.
..............................QUOTE]
I'll have a look. I was not completely happy with the design as I tried to incorporate a caster adjustment in the bottom ball joint mount - hence my desire to create a compression strut fabricated bottom arm (think of the Japanese Racer with the caster adjusting rod (tension rod) on the cab side of the main track arm.
I did some very quick calcs on the angles involved and it wasn't that bad especially with a lowered suspension say 40-50mm.
evilC