|
911 Fuches Need 7mm Of Spacer, Machine The Stock 20mm Spacer Down To Fit
The 2 Pot Calipers Only Came On The 90-91 964
The 944 Rear Disc Has An Offset Of 71mm - The 911/964 Is 80mm
-so Thats That, Even If You Use A 15 Or 16 Inch Fuch, The Casting / Spoke Position Is The Same
-you Can Fit A Boxster 2.5/7 Caliper Onto A Early 964 Disc, These Are 298 By 28, And Have A Massive 80mm Offset - Ideal For Getting The Caliper In-board
-anyways, You Have To File The Pins Down, And Rub The Pads A Bit
-but They Do Fit - I Have Done It, THEY WILL FIT ONTO A STOCK 951 HUB - LOCATING SCREW WISE
-ps A 993 Disc, Or Maybe A 996 Rear Disc, Hasn't The Same Location Screw Layout As A 944
I Have Fitted 16 By 6 Fuches With The 2 Pot 1990 Caliper Using A Early 298mm Disc, And Needed 7mm, I Just Had The Stock Spacer Cut, And The Spigot Milled In, Then Fitted Baywindow Front Studs
|