Quote:
Originally Posted by helowrench
being across the pond, most of their beetles were swingaxle which requires an inner pivot to be added if you convert to IRS rear suspension.
If you already have an IRS bug, you will simply need to use VW sized swingarm bushings installed into the 944 arms.
Rob
|
Exactly, thanks Rob. I forgot about the differences but the rest still applies.
Quote:
Originally Posted by Xellex
I think EvilC referred to something else: mounting the Anti-roll bar from the Porsche to your bug requires cutting the brackets off the Porsche torsion housing, and welding them to the bug torsion housing.
You are going to need to add some material, because the anti-roll bar needs to clear the chassis fork.
In my case, the Anti-roll bar bushing sits at exactly 6,5cm away from the torsion housing.
|
That as well. Thanks Xellex.
evilC