Hi Kombi,
Have you checked the front/rear brake bias? That will depend on the piston sizes in the front and rear calipers and whether you have the later stepped m/c.
I would have thought a good starting point would be 944T or 928S4 rear 4 pots to compliment the fronts plus a 19/19 m/c.
Also, have a look at what Whiteline suggest for the type 3 in respect of sway bars. Leaving the front standard with the 14mm 944 rear sway bar might induce a little more oversteer than you might be used to. Its not likely to be much but most modern car manufacturers dial in understeer as a safety feature. You might need to add a piggyback bar at the front.
Clive
|