Quote:
Originally Posted by 70Turbobug
I wanted a cam slightly more agressive than the 119 without losing idle quality.I´m hoping it will be a bit more snappy and faster on spool up.My original choice was the 163 but the 86a runs much smoother and I believe it is a better cam for a 2 liter. .
|
Just checked webcamshafts website and I think the valve lift of the 86a is too small (11.05mm). Turbo's love valve lift is my current experience.
There's probably a reason Webcam advertises their 119 as a turbo cam...
I would advise to change the cam to one with about half an inch lift (12,7mm)
1.7mm lift difference is A LOT!
Just my 0.02 cents worth of friendly advise