Quote:
Originally Posted by Wally
I still use the Bilstein gas shocks for VW IRS I bought 20 years ago. They have worked on my typ 3's (squarebacks) and 1303 bugs on all the cars I drove since...
They work very well, but I always feel they should have been a little bit shorter as I fear bottoming them out. My (shortenend) bump stops have always prevented this I think, but would have liked a little more travel out of them so I cold shorten the bump stops an inch more..
Oh, I did of course bore out the bottom 12mm mount for the porsche's 14mm bolts. A dedicated (porsche) shock with 14mm from the start would be better of course.
|
Hi Wally, aren't your dampers passed their best by now? I know Bilys are durable but 20 years is a long time - unless of course they are rebuildable?
I also bored out the bush for the 14mm Porsche bolt on the Spax dampers we fitted, but it occurred to me that a standard 14mm steel bush pressed in to the 12mm rubber might also work giving a greater preload to the bush i.e. making it stiffer as well as giving a better crush resistance compared to a bored out steel bush?
Clive