So I might win the dumbest thing of year award on this site, I don't want to admit this but I did not have the front body mount bolts installed.
Single best modification to my beetle: connecting the body to the frame.
When I bought my car it was just bare steel that a guy had done a bunch of body work to, so I'd never taken a beetle apart before to see where everything goes. He also replaced front body mounts with some new steel but there were no holes or anything to bolt to.
I had to drill a 5/8" hole in the inner fender to gain access to the inside of the body mount to fit a nut inside there,drill a hole up from the bottom and hold the nut tight with a screw driver.
All I can say is WOW does it drive better now
. The k-frame and body before were flexed apart by about an inch, and the bolts sucked them together.
Mike