Got a few things done over the weekend.
I finished sanding the solvent pop out of the fenders. I broke through the clear in a few places on each fender. So I'm going to have to put another coat of orange and two more coats of clear. I also let them sit out in the sun for a full day so they could vent all the solvents out.
I also sanded on the hood and deck lid a little more and then painted them black. I laid down a coat of sealer and a couple coats of black giving plenty of time between each coat so there's no solvent pop issues. I did however manage to get a run at the nose of the hood and a couple small spots on the deck lid. So I didn't move onto clear. I tend to spray my coats on a little too heavy. I just need to dial back the material a little.
I'm going to sand out the runs and the little bit of orange peel and trash in the paint, then follow up with another coat of black and 2 coats of clear. Other than the runs, it was coming out pretty nice. I couldn't be happier with how the body work came out.
Here's a quick video of how the hood and deck lid look.
http://www.youtube.com/watch?v=_ax4fGf0F9o