Hi
The G50 is very hard to keep stable on a jack, so I made this bracket to hold it on my jack.
I've used the stock G50 alloy mount, I welded some tabs onto the chassis for it bolt onto and I had move the mounting slightly using some aluminium blocks.
I cut the centre spline from 2 chassis and had an outer sleeve made
I welded the splines in with "rose bud" welds so that 40HP / 1500 Beetle length 26 mm torsion bars poked out the correct amount to mate up with 944 spring plates.
Steve
__________________
STI powered 1303 in the works.
|