[Steve C]

I widened the engine bay area around the bumper bracket, my motor has variable valve timing there is a huge lump on the left rear cam cover that I had to be careful to make room for.

These motors are real tight fit and are also a pain as they want to fall off the jack all the time, that's why I made motor dolly with wheels, even when the motor is sitting on the floor it wants to fall over onto the flywheel. You will notice that I have jack stands under the engine dolly, this is to prevent the weight of the motor tipping the car over backward, might not happen, just being careful, it actually did happen to me while fitting a motor to Notchback that no front-end in it.