|
Sorry to jump in here guys, but, I am trying to see what kind of interest there would be in fabricated tca's for 02/03s.
I fitted 944 stuff to a late 03 cab, using a machined spacer to make up ther deficit between VW and Porsche ball joint sizes.
It was a customers car with a 1776.He drove it real hard.
He called me months later to say something had failed on the front end as he was backing out of a parking space.
The spacer/nut and bolt had failed.
I looked at it and thought I would get rid of the whole lot and build my own arms that would accept the Porsche ball joint.
In the end ,I modded his tca's.Worked a treat.
The ultimate for me, on an '03/02, would be a heim type top mount with eccentric adjustment built in, struts converted to 2.5" coils,Rose jointed tca's with a front link that replaced the anti roll bar. A drop link from the arm could then be linked to a fabbed roll bar mount.
I want to do this to an '03 for circuit/engine testing duty.
Once I have done my own Ghia drag car, I will spend some more time on it and in more depth.
Would this be of interest to other Super owners?
Cheers,Ross.
|