Well Jason, I havn't decided what to do about the waterlines.
This weekend and last, I installed the headlights, turn signals, front bumper, mirrors, wiper motor, tail lights... when I installed the mirrors, I wanted a frim mount instead of having only the two bolts holding on the sheet metal. So I cut a peice of aluminum and drilled two holes in it to act like a big washer. I forgot to take a picture.
![](http://i73.photobucket.com/albums/i212/Mikey_VKG/PICT0191.jpg~original)
I cleaned and put the rubber on the front and rear windows. I also set them on the car for a picture. The front glass is new but the rear is the original.
I worked on cleaning the windows while the fiberglass filler was curing. I needed to shorten the rear bumper on the sides where I widdened the rear fenders.
![](http://i73.photobucket.com/albums/i212/Mikey_VKG/PICT0196.jpg~original)
Getting closer.
![](http://i73.photobucket.com/albums/i212/Mikey_VKG/PICT0195.jpg~original)
Final mount before paint.
![](http://i73.photobucket.com/albums/i212/Mikey_VKG/PICT0199.jpg~original)
Ghia bumpers also mount on the ends of the blade, I had to replace 1 missing mount in the rear bumper and both missing mounts in the front. They turned out really good. I mounted the ends of both bumpers.
My help (wife) was sick this weekend. So I had to do everything myself.