Quote:
Originally Posted by Kafer_Mike
I went thru two headliners trying to DIY. First one ripped along a seam and the second was crooked. I had a installer friend assist with the third. One tip is to buy a couple boxes of medium binder clips (the black clips with chrome wings). Use them to stretch and hold the headliner in place until you get it positioned how you want it. They also help clamp things in place after you glue - especially around the window openings. Great if you are trying to install by yourself. Another is to make 1" relief cuts at the edge of the rod pockets to keep the seams from ripping (I learned that AFTER the 1st headliner. ).
Here a pretty good article from the VW Trends archive - http://www.vwtrendsweb.com/tech/0409.../photo_01.html
|
Thanks for the tips! I've read that article, but the real-world mistakes are the ones I seem to be learning the most from. Thank you for being a guinea pig :-)
Quote:
Originally Posted by Steve C
Hi
Looking good. Have you thought about changing to a fuse boxes with blade fuses, those ceramic fuses in the stock fuse box can corrode and give a bad contact.
The good thing about using the 2 bolt front end is that you can have two camber adjustments, the stock one and you can also elongate one of the strut holes to use Golf/Rabbit camber adjustment on the strut body.
You can also use the two camber adjustment to slightly widen or narrow your track by setting the control arm adjustment to full negative or positive camber and using the camber adjustment on the strut to get the camber correct.
I did this on my sons 1303 to 17x7 ET55 wheels on it.
Steve
|
If someone made a factory-fit fuse box to replace the old-style one, I'd drop in blade fuses in a second. But, since I've decided to stick to an OE-style harness (with my own additions), this saves me from having to hack-in an alternative fuse box. And, truthfully, if I was doing that...I'd put a center console panel in the car and go absolutely nuts with all the relays and fuses run out of the panel.
My '69 had issues with the fuse contacts becoming corroded. I quickly learned the trick was to leave the clear cover off the fuse box. Occasionally while bored at a light I'd give the fuses a quick rotation. Problem free for three years!
-Dave