Hi
Just got back from the dyno shop, good news is that kilowatts were found as well lots of torque.
Shame its raining, I had to behave myself.
MSEdyno 2 is high and low boost settings on the e Boost 2, blue is low, red is high. MSEDyno 1 is just two different runs.
The E boost 2 defaults to lower setting which is about 16 psi on start up, I need to select the higher setting if I want it.
Its a heavy car so I will see how it goes on the weekend at the VWMA drags in Sydney.
Steve
