Another option posted that came up when I was looking at taking the sawzall/welder at it similarly was that Marco Mansi sells T1-inner mount eccentric bolts.
His website seems to be down at the moment (worked recently) , but here's a thread where he first posted them AFAICT, with pics if you scroll down...
Cell phone cameras have come a long way since 2007
These have been around awhile so you may have seen them, just crossing the "i"s and dotting all the "t"s.
Putting my 86 944T arms on next week.
Played with ludicrous sized front brakes today.
Figured out a cheap DIY mostly bolt on combo for Wilwood Dynalites w/vented rotors for T3s.
(works better with early spindles, not bad calipers with the bridge bolt mod)
Also found how I'll probably install the Superlites, a little welding needed.
I cant shrink the pics to 85K, not happening. That's worse than even the STF with its odd image geometry size limits and related issues.
Will link if interested, need to post over there anyway on project.
Last edited by piledriver; May 8th 2016 at 02:42.
|