Quote:
Originally posted by Farmer
There is a little disturbance at the steering wheel. That is why I have a hunch that my stock inner bushings are not strong enough to hold the 23 mm Sway bar, and thereby causing movement.
But it could also be the slight negative angle on the trailing arms that does it. I´m not sure. - When I get around to getting my new horse installed in the rear I will go deep into it again. I just needed a new angle on the problem.
|
I'm using the PU bushings from TopLine. Good stuff.
A new angle? Seriously, try to figure out your scrub radius.'
You still have not revealed. What brakes are you using?
Sprint.