No, they won't fit...With an IRS car it takes a bit of clearacing to fit a 7" wheel...8" might be possible with the right offset, but things would be very close in the end if possible to begin with.
ET23.3 and ET10.6 would require 1-1/4" wider fenders...ET10.6 would fill them out excellently with a stock trackwidth too.
Things that do fit a 'stock' car:
15x4.5 ET42 (rare)
14x5.5 ET46 (common)
15x5.5 ET42 (rare)
15x7 ET49 (ultra-rare)
15x6 ET36 (common)
16x6 ET36 (common)
Last edited by KaferChris; June 5th 2005 at 22:23.
|