Hi Bill!
Thank you very much for the nice words, and I`ll try to answer as good as I can.
The Gear shifter is from Gerd Weisser in Germany.
http://www.gwd-weiser.de/index2.htm
The Polo racing seats are the only pair that I know of that is delivered from VW Racing to a private customer. All the other seats were fitted in the Polo Super 1600 rally cars that VW Racing built for the junior world championship rally cars. VW Racing has changed the name and is now VW Motorsport again.
The roll cage is from Heigo.
http://www.heigo.de Click on Überrollbügel
The wheels are from a Audi/Porsche RS2, and they are 7x17" ET55. I have used 21mm adapters in the front and 35mm adapters in the rear.
The adapters is from Porsche since i ordered the brakes from Kerscher with Porsche bolt pattern
http://www.kerscher-tuning.de
I guess you can get them from your local VW/Audi dealer.
The partnumber is: 8A0 601 025 P Z17
The wheels fit under the stock wings, but you will have to modify the arches a little bit to prevent them from touthing the arches.
I am planning a Type 4 engine for my car, and that engine will have another exhaust system. The 1914cc T1 engine will go into my next project, a 1954 T1 Cal-looker so I guess the exhaust wil be a bit more correct for that car.
I hope this will help you, and welcome back into the VW scene again.
If you have any other questions I will try to answer as good as I can.
Baard