[speedy]

hello chris and dorigtt, the shifter works fine, it is a bit time consuming to get it set up ,you must put another 4 holding bolts in the base to keep the shifter solid or you will find that consistant shifting is near impossible , i made a plate to sit on top of the base and bolted through this, do this and shifting is a pleasure the throw is about 1.5"-2" depending on how you set it , on my standard i had to cut the handbrake down 25mm to use it but this is no big deal , i have heard allot of people have had problems with this shifter ,most of these will be fixed by making the base more ridgid as the pivot point is 150mm above the tunnel
hope this helps
cheers jon
p.s will get some high res pics on as soon as i can