View Single Post
  #4  
Old July 29th 2002, 15:41
Alex's Avatar
Alex Alex is offline
Registered User
 
Join Date: Aug 2002
Location: Oakville, Ontario, Canada
Posts: 1,115
You have to do minor mods to the spindle to bolt up 944T calipers.
You have to cut away the lower thread....mill or spot face the material next to it to the same thickness of the top thread....drill a new hole for the lower bolt and tap both holes to M12 I believe.
I suugest tapping the upper hole, mounting the disk and see where you need to take the material off and where to drill.
You also need to space out the caliper with a washer to center it properly.

Alex
Reply With Quote