|
I have a front strut tower brace, it is "not chrome", heavy duty, and totally adjustable.
You sould also pull a house with it if you were so inclined..
It is made fron 3/16 mild steel for the strut cap plates, and has a catapillar tractor link for the fuctional part, about $15-20 US, and about 30 seconds of welding, a few more quality moments with a sawzall and drill for the plates.
I made the crossbar removable... Pull the pins on the ends, remove the preload, and it slides off.
I have been considering painting it with Hammerite, but then its origins wouldn't be as obvious, and to me, that is half the fun.
Lemme know, and I'll send pics.
Last edited by piledriver; November 11th 2002 at 18:34.
|